Creating A New Polygonal-Shape Stitching Pattern; Setting The Step From Which Polygonal-Shape Stitching Is Started - JUKI LZ-2290CS Instruction Manual

8-2-2. Creating a new polygonal-shape stitching pattern

① Selecting the new-pattern creating function
Display the "new sewing pattern creation screen" referring to ① in
② Creating a polygonal shape stitching pattern
<New pattern creation screen>
③ Setting the pattern function on a step-by-step basis
A
<New sewing pattern edit screen>

8-2-3. Setting the step from which polygonal-shape stitching is started

In the case it is necessary to re-sew a pattern from the middle of the pattern after the occurrence of troubles
such as thread breakage, it is possible to re-start sewing from an arbitrary step of the pattern.
<Sewing screen (Polygonal-shape stitching pattern)>
❶
❷
❹ ❺ ❻
❸
❶
"8-1-1. Creation of a new pattern" p.
Referring to ② in
tern" p. 116 , select polygonal-shape stitching
❶ on the sewing pattern selection
pattern
screen. Then, press
The "new sewing pattern edit screen" is dis-
played.
1) Set the pattern function with buttons ❸ on a
step-by-step basis.
Refer to "5-2. Sewing patterns" p.
2) The total number of steps you have set is dis-
played on the right of section A. The current
step is displayed on the left of section A. The
current step can be changed with
3) Press
The "sewing pattern number registration
screen" is displayed.
Press
confirmation screen.
Steps of procedure to be taken after the afore-
mentioned step are same as steps ③ to ④ in
1-1. Creation of a new pattern" p.
The current step can be changed by press-
❶ on the sewing screen for polygo-
ing
nal-shape stitching pattern.
– 126 –
"8-1-1. Creation of a new pat-
❷ .
❺ .
❻ to display the data discard
116.
116.
38.
❹ .
"8-