Connecting The Power Source Cord; Voltage Specifications; Connecting Single Phase 200V, 220V, 230V And 240V; Connecting Three Phase 200V, 220V And 240V - JUKI AMB-289/IP-420 Instruction Manual

(2) Connecting the power source cord

1) Voltage specifications

Rating label

2) Connecting single phase 200V, 220V, 230V and 240V

Connect so as to supply the power to the white wire and the black wire as shown in the illustration.
Light blue
Table
Control box
Green/Yellow
Brown

3) Connecting three phase 200V, 220V and 240V

White
Table
Control box
Green/Yellow
Black
Black
Red
1. Never use under the wrong voltage and phase.
2. When changing the voltage, refer to the item of "Changing the voltage of 100 / 200V".
Voltage caution
seal
Voltage indication seal
(3-phase type only)
Light blue
Green/Yellow
Brown
Power switch
White
Green/Yellow
Plug
Red
Power switch
Power source specifications are indicated on the
voltage indication seal. (3-phase type only)
F o r o t h e r t y p e m a c h i n e s , p o w e r s o u r c e
specifications are indicated on the voltage caution
seal and the rating label.
C o n n e c t t h e c o r d i n a c c o r d a n c e w i t h t h e
specifications.
Plug
Power source cord
Power source cord
Ⅰ–6
AC200 V
Brown
AC220 V
Light
AC230 V
blue
AC240 V
Green/ GND
Yellow
Red
AC200 V
White
AC220 V
AC240 V
Black
Green/
GND
Yellow