JUKI LZ-2290CS Instruction Manual page 145

④ Creating a custom pattern
C A
<Custom pattern edit screen>
❾
C

B D E
❽ ❻ ❼




1) A : Selected custom pattern number
B : Step number being edited and the total
number of steps
C : Display area for the created zigzag pat-
tern
D : Feed amount of each step
E : Stitch baseline of each step
The aforementioned five items are displayed
o the custom pattern edit screen.
2) Set the feed amount by pressing
Set the stitch baseline position by pressing
3) When
try position for step 1 is set and the screen
changes over to the step 2 setting screen.
4) Carry out the steps of procedure 2) and 3)
successively to set the needle entry position
for step 2 and beyond.
5) If you want to insert or delete a step, select
the target step by pressing
press
6) When
is repeated.
7) When
size of pattern display area C is changed
over.
– 140 –
❼ .
❽ is pressed, the needle en-
❾ . Then,
 or  .
❾ is pressed, the created pattern
 is pressed, the display
❻ .