Set The Utility System - Tenma 72-2650 Operating Manual

72-2650/72-10510/72-8225A /72-8705A/72-8710A user manual

2.7 Set The Utility System

By pressing the UTILITY function button on the menu
area, the user can set a different utility setting, where the
button locations are shown in the figure below.
72-2650 DSO (Top)
72-10510/72-8225A/72-8705A/
72-8710A DSO (Down)
Figure 2-23 Function Key of
Sampling System (Function)
There are three function menu pages at the Utility menu,
all of which are shown in Tables 2-17, 2-18 and 2-19.
Table 2-17 Utility menu page 1
Function
Settings Description
Menu
Press to execute self- calibration
Execute
Self-Adj
function
(F1)
Close
Leave self-calibration
Pass/Fail
See Table
Set waveform pass/fail operation
(F2)
2-22.
Recorder
See Table
Set waveform recording operation
(F3)
2-20.
Language Press to change to different system
Language
(F4) language
Next(1/3) Press to go to next utility function
(F5) menu page
Table 2-18 Utility menu page 2
Function Menu Settings Description
Reset (F1) Reset to factory default setting
Change the skin for the function menu
Skin (F3)
Adjust the grid brightness by
Grid Bright(@) 1%-100%
using the multi-purpose knob
Next 2/3 Go to the next page
41