Template Setting; Set The Measurement Parameters - Tenma 72-2650 Operating Manual

See Table
Template
Press to create template of pixel area.
2-23.
(F4)
Back (F5)
Return to Utility Function Menu
After pressing the F4 on the Pass/Fail function menu,
you will be able to create a template of pixels to be
compared.
Table 2-23 Template Setting
Function
Settings Description
Menu
According to adjustment, build
Create
horizontal and vertical Pass/Fail
/
(F1)
tolerance range.
Press [F2] to select horizontal
Horizontal
length and use the multi-purpose
1-200
knob to set the pixel length for the
(F2 and @)
Pixel
horizontal length.
Vertical Press [F3] to select vertical length
1-100
(F3 and @) and use the multi-purpose knob to
Pixel
set the pixel length for the vertical
length.
Return (F4) / Return to pass detection menu.
44
72-2650/72-10510/72-8225A /72-8705A/72-8710A user manual
You will need to press F1 to confirm creating the
pixel template after setting the horizontal and vertical
length of the pixels.

2.8 Set The Measurement Parameters

72-2650/72-10510/72-8225A /72-8705A/72-8710A
DSO support up to 28 of the automatic waveform
measurement parameters. You can view at most five of the
measurement parameters at the same time on F1-F5
function menu. To see measurement parameters,
please press MEASURE on the control panel.
72-2650 DSO(Top) ,
72-10510/72-8225A/72-8705A/72-8710A DSO (Down)
Figure 2-24 Function Key of (Auto measurement parameter)