Waveform Recorder Menu - Tenma 72-2650 Operating Manual

Table 2-19 Utility menu page 3
Function
Settings Description
Menu
Version (F1) Press to view the system version.
Press to enter the LAN address
setting. Notice that LAN is an option
LAN (F2)
for 72-2650 DSO.
Frequency
ON To turn ON frequency counter
Counter *
To turn OFF frequency counter
OFF
(F4)
Back to page 1
First 3/3(F5)
The waveform recorder function at the 72-2650/72-10510/
72-8225A /72-8705A/72-8710A DSO is
generally easy to operate.
The user should set up Source and Operation as shown
in the below table.
42
72-2650/72-10510/72-8225A /72-8705A/72-8710A user manual
Table 2-20 Waveform Recorder Menu
Function
Settings Description
Menu
Select CH1 as recording signal source
CH1
CH2
Select CH2 as recording signal source
Source (F1)
Select CH1and CH2 as recording
CH1+CH2
signal sources
See Table
Operation
2-21 for Sub-menu for operation
(F2)
detail
Save waveform recording into USB
memory.
Save (@)
Select from 1-200 memory location.
(F3)
Press F3 to save.
Load the waveform recording into
USB memory.
Load (@)
Select from 1-200 memory location.
(F4)
Press F3 to load.
Return (F5) Press to return to Utility function menu
After pressing the F2 button on the waveform recorder
menu, you should see the waveform recorder operation