2.5 Set The Display System
The user can change the display setting of the DSO by
pressing the DISPLAY button of the 72-2650/72-10510/
72-8225A /72-8705A/72-8710A DSO as the figure shows below.
72-2650 DSO
72-10510/72-8225A/72-8705A/72-8710A DSO
Figure 2-20 Function Keys of Display System
After pressing the DISPLAY button, the function
menu will change to the display setting for the DSO.
34
72-2650/72-10510/72-8225A /72-8705A/72-8710A user manual
Table 2-12 Display Menu
Function
Settings Description
Menu
Vector
Display as vector of sampled data points
Types (F1)
Dots
Display any of the sampled data points
Display Y-axis as voltage level of
YT
input signal and X-axis as time
Display Y-axis as CH2 voltage level
Format (F2)
of input signal and X-axis as CH1
XY
voltage level of input signal
Real-time updating (Display) of the
Off
acquired signal
1s
Display the acquired signal every 1s
Persist (F3)
2s
Display the acquired signal every 2s
Display the acquired signal every 5s
5s
Accumulate display all the acquired
Infinite
Waveform
Set the brightness of the waveform
1 % -
Brightness
by multi-purpose node between
100%
(@)
1%-100% brightness