Table of Contents
Advertisement
Functions Menu
Bandwidth restriction
Vertical scale coefficency
VOLTS/DIV
Opposite phase
Horizontal position
SEC/DIV
Acquisition mode
Sampling mode
Fast collecting
Trigger type
Trigger info source
Trigger coupling
Trigger modes
Load off time
Trigger level
Slope type
Signal recognition
Note: Regulations of trigger information source under AUTO are based on:
1.
The signal input channel shall be used as the trigger source when only one channel
has an input signal.
2.
In using multi-channels, automatic setting function shall set the vertical control of
each channel and to set the horizontal and trigger control by using activity channel
with smallest number.
3.
CH1 shall be used as trigger source when there is no signal in all channels.
System prompts
•
Adjustment at ultimate limit - this informs you that the control adjustment has
reached it's limit in the current status. No further adjustment is possible. When
the vertical deflection factor ON/OFF, time base ON/OFF, X shift, vertical shift and
trigger level adjustments have reached their ultimate limits, this prompt will appear.
•
USB Drive Connected - after a USB drive is plugged in this prompt appears when
the connection is valid.
•
USB Drive Disconnected - after a USB drive is unplugged from the oscilloscope
this prompt appears.
•
Saving - when the oscilloscope is saving a waveform, this prompt will show on
screen. A progress bar appears at the bottom.
•
Loading - when recalling a waveform, this prompt shows on screen. A progress bar
appears at the bottom.
Full bandwidth or 20MHz to keep the present setting.
Based on signal amplitude
Coarse tuning
Open or close to keep present setting.
Automatic tuning
To regulate based on signal frequency
Setting: normal sampling, peak value, average
Equivalence or real time present setting
Off
Setting: edge, pulse width, video or slope
Setting: CH1, CH2, EXT, EXT/5 or AC Line.
Setting: DC, AC, low or high frequency restriction
Automatic
Minimum value
Set to 50%
Rise
Open the required channel if there is a signal
27
Setup
Advertisement
Table of Contents
