Set The Utility System - Tenma 72-7910 Manual

Save [F4]
Use the multi‐purpose knob to select the storage memory destination (please notice
that 200‐group data storage is available).
Press F4 to store a bitmap file into a USB disk;
Remove the USB disk.
7. Set the Utility System
By pressing the UTILITY function button in the menu area, users can do different utility
settings, where the button location is shown in the figure below.
Figure 2‐23 Function Key of Sampling System (Function)
There are three function menu pages for the utility system setting shown in Table 2‐17,
18, 19 below.
Table 2‐17 Utility Menu Page 1
Function
Menu
Self‐Adj (F1)
Pass/Fail
(F2)
memory available to store bitmap file
navigated by the multipurpose knob.
—— Press to store a bitmap file
——
Settings
Execute
Close
See Table
2‐22
46
Model 72‐7610/72‐10510 User Manual
Description
Press to execute self‐calibration
function
Leave self‐calibration
Set waveform Pass/Fail operation