Set Vertical System - Tenma 72-10175 User Manual

Set Vertical System

Set Channel
Click "Vertical" in "Setup" Menu.
The Channel Selection
The Channel Control Panel in sidebar
The Vertical function:
Turn ON/Off: Turn on/off the channel
Volt/DIV: Select the channel voltage/div
Coupling: Select the channel coupling
Probe: Select the channel probe attenuation
Filter: Select software ¿lter
Reset: Set the channel vertical position to zero
Invert: Turn on/off the invert function.
BandWidth Limit: Limit the channel bandwidth to 20MHz to reduce noise.
Change Volt/DIV
You can click "Volt/Div" in "Vertical Setup" window to select the voltage