Tenma 72-2650 Operating Manual page 50

Select to store a Bit Map file into
Bit Map
Types (F1)
the USB disk only
Select waveforms from CH1 channel
CH1
to be saved
Source(F2)
Select waveforms from CH2 channel
CH2
to be saved
Destination (position of the internal
memory) where the waveform will be
saved. There are 20 sets of internal
Dest (@)
1～20
memory available to store a
waveform navigated by the
multipurpose knob.
Save Store waveform
Next
Go to the next page
1/2 [F5]
Press F1 to go to Bit Map selection.
The user should see the below function menu.
40
72-2650/72-10510/72-8225A /72-8705A/72-8710A user manual
Table 2-16 Bit Map File Storage Menu (Page 2)
Function
Settings Description
Menu
Select to store a Bit Map file into
Types (F1) Bit Map
the USB disk only
Destination (position of the USB
desk memory) where the bit map file
will be saved. There are 200 sets of
Dest (@) 1～200
USB disk memory available to
store a bitmap file navigated by the
multipurpose knob.
Save[F4] Press to store bitmap file
Use the multi-purpose knob to select the storage memory
destination (please note that there will be 200 memory
locations available).
Press F4 to store the bitmap file into a USB disk;
Remove the USB stick.