Xy Mode; Set The Storage And Load System - Tenma 72-2650 Operating Manual

72-2650/72-10510/72-8225A /72-8705A/72-8710A user manual

XY Mode

The user can enter the X-Y mode by pressing the
Display button and select F2. In this mode, CH1
and CH2 are required to be applied simultaneously.
The figure below shows an example for the XY mode display
Figure 2-21 Waveform Display in XY Mode
Attention:
The following functions will be disabled in XY display mode:
● Automatic measurement
● Cursor measurement

2.6 Set The Storage and Load System

The user can enter the storage and load menu by
pressing the STORAGE button.
72-2650 DSO (Top)
72-10510/72-8225A/72-8705A/72-8710A DSO (Down)
Figure 2-22 Function Key of
Sampling System (STORAGE)
The below steps will guide you to store a waveform
in the internal memory of the DSO:
35