72-2650/72-10510/72-8225A /72-8705A/72-8710A user manual
Appendix B: Accessories of
72-2650/72-10510/72-8225A
72-8705A/72-8710A DSO
Standard accessories:
● Two probes (selectable for 1:1 and 10:1).
Please refer to instructions on probe accessories for
details.
ll probe conforming to EN61010-031 standards.
-When the switch is at 1× position, it belongs to
150V CAT II.
-When the switch is located in 10× position, it
belongs to 300V CAT II.
● One power cable
● One User Manual
● Oscilloscope communication
control software CD
● One USB Cable
Appendix C: Maintenance
and Cleaning Maintenance
General Maintenance
Please do not store or place the instrument in any
places where the LCD of the instrument is exposed to
sunlight directly.
Caution: Please do not stain the instrument or probe
with spray, liquid or solvent, so as to avoid damaging the
instrument or probe.
Clearing
Check the instrument and probe frequently. Clean the
surface of the instrument according to the following
steps:
1. Please wipe the surface of the instrument and probe
with a soft cloth. Do not to scratch the LCD screen.
2. Wipe the instrument with a wet cloth after disconnecting
61