Tenma 72-2650 Operating Manual page 47

72-2650/72-10510/72-8225A /72-8705A/72-8710A user manual
Table 2-14 Waveform Storage Menu (Page 1)
Function
Settings Description
Menu
Type (F1)
Wave Select to store an acquired waveform
Select waveforms from CH1 channel
CH1
to be saved
Source(F2)
Select waveforms from CH2 channel
CH2
to be saved
Destination (position of the internal
memory) where the waveform will be
saved. There are 20 sets of internal
Dest (@) 1～20
memory available to storage
waveform navigated by the
multipurpose knob.
Store waveform
Save
Next
Go to the next page
1/2 [F5]
Press F5 to go to next function menu.
User should see below function menu.
Table 2-14 Waveform Storage Menu (Page 2)
Function
Settings Description
Menu
Select to store an acquired waveform
DSO
into the internal memory of the DSO
Desk (F1)
Select to store an acquired waveform
USB
onto the USB device
Select normal data length (Same
Normal
data number as display)
Length (F2) Select long data length (Same as
Long
data number as data buffered in the
DSO FIFO)
Previous
Go to the previous page
2/2 [F5]
Press F1 to select USB as storage destination.
Press F2 to select normal storage.
Press F5 to go to the first page of the function menu.
Use the multi-purpose knob to select the storage
memory destination (please note that there will be 200) .
37