modulation signal.
4. Please select average sampling mode when hoping to reduce the random noise in
displayed signals.
Explanation of nouns
Real‐time sampling mode:
Data sampling with the system real‐time rate is used to observe the
waveform within the rate.
Equivalent sampling mode:
Data sampling with the rate higher than the maximum. This is used to
observe the periodical waveform at beyond the maximum sampling rate.
5. Set the Display System
Users can change the display setting of the oscilloscope by pressing the DISPLAY button.
Please refer to the figure below.
After pressing DISPLAY button, the function menu will change to the display setting for the
oscilloscope .
Table 2‐12 Display Menus
Fu n ct i o n
M e n u
Figure 2‐20 Function Keys of Display System
Se tti ngs
39
Model 72‐7610/72‐10510 User Manual
Description