Using A Forklift; Shipping Bolts And Brackets - YASKAWA MOTOMAN-VA1400 Instructions Manual

VA1400

2.1.2 Using a Forklift

2.2
2 Transport

2.2 Shipping Bolts and Brackets

When using a forklift, the manipulator should be fixed on a pallet with
shipping bolts as shown in Fig. 2-2 "Using a Forklift". Insert claws under
the pallet and lift it. The pallet must be strong enough to support the
manipulator. Transport the manipulator slowly with due caution in order to
avoid overturning or slippage.
Fig. 2-2: Using a Forklift
Shipping Bolts and Brackets
The manipulator is provided with shipping bolts and a shipping brackets.
(See Fig. 2-1 "Transporting Position".)
Fig. 2-3: Shipping Bolts and Brackets
Hexagon socket
head cap screw M8
(2 screws)
Front View
• The shipping bolts and bracket are painted yellow.
• The shipping bracket is to be fixed with the hexagon socket head cap
screws M10 (2 screws).
Before turning ON the power, check to be sure that the
shipping bolts and brackets are removed. The shipping
NOTE
bolts and brackets then must be stored for future use, in the
event that the manipulator must be moved again.
2-3
Bolt M16 (4 places)
Pallet
Forklift claw entries
Shipping bracket
Hexagon socket
head cap screw M8
(2 screws)
Hexagon socket
head cap screw M10
(2 screws)
HW0484963
155556-1CD
Side View
20 of 85