Toyota Celica 2005 Repair Manual page 8

Example:
2005 CELICA (RM1131U)
INTRODUCTION − REPAIR INSTRUCTIONS
(7) When checking continuity at the wire connector, in-
sert the tester probe carefully to prevent terminals
from bending.
(8) When using a vacuum gauge, never force the hose
onto a connector that is too large. Use a step−down
adapter for adjustment. Once the hose has been
stretched, it may leak air.
(m) Installation and removal of vacuum hose:
(1) When disconnecting vacuum hoses, use tags to
identify how they should be reconnected to.
(2) After completing a job, double check that the vacu-
um hoses are properly connected. A label under the
hood shows the proper layout.
(n) Unless otherwise stated, all resistance is measured at an
ambient temperature of 20°C (68°F). Because the resis-
tance may be outside specifications if measured at high
IN0002
temperatures immediately after the vehicle has been run-
ning, measurement should be made when the engine has
cooled down.
7
IN−7