DI−102
OBD ll scan tool (excluding hand−held tester):
1
Check throttle position sensor.
Component Side:
Throttle Position Sensor
T1
VTA
E2
Front View
OK
2
Check for open and short in harness and connector between ECM and throttle
position sensor (See page IN−30).
OK
Replace ECM (See page SF−78).
2005 CELICA (RM1131U)
DIAGNOSTICS
(a)
(b)
OK:
Tester Connection
VC (T1−1) − E2 (T1−2)
VTA (T1−3) − E2 (T1−2)
VC
A21413
NG
NG
−
ENGINE (1ZZ−FE)
Disconnect the T1 throttle position sensor connector.
Measure the resistance between the terminals of the
throttle position sensor.
Throttle Valve
Replace throttle position sensor.
Repair or replace harness or connector.
300
Specified Condition
⎯
2.5 to 5.9 kΩ
Fully closed
0.2 to 5.7 kΩ
Fully open
2.0 to 10.2 kΩ