Internet Connection Setup - D-Link DSR-150 User Manual

Section 3 - Basic Configuration
This router has two WAN ports that can be used to establish a connection to the internet. It is assumed that you
have arranged for internet service with your Internet Service Provider (ISP). Please contact your ISP or network
administrator for the configuration information that will be required to setup the router. Supported Internet
connection types include Dynamic, Static, PPPoE, PPTP, L2TP, Japanese PPPoE, and Russian PPPoE/PPTP/L2TP.
To configure your router to connect to the Internet, follow the steps below:
1. Log in to the router.
2. Click Wizard in the upper-right side of the page. If you want to manually configure your Internet
settings, refer to "Connect to the Internet" on page 32.
3. Click Run in the Internet Connection Wizard box.
4. Toggle On next to either DHCP or Static IP Address and click Next. If your connection type is not listed,
refer to "Connect to the Internet" on page 32.
D-Link DSR-Series User Manual

#5 Internet Connection Setup

9