Section 5 - Connect to the Internet
Path: Network > Internet > IP Aliasing
A single WAN Ethernet port can be accessed via multiple IP addresses by adding an alias to the port. This is done
by configuring an IP Alias address. To edit or delete any existing aliases, right-click the alias and select either Edit
or Delete.
To create a new alias:
1. Click Network > Internet > IP Aliasing.
2. Click Add New IP Aliasing.
3. Enter the following information and click Save.
Field
Interface
IP Address
Subnet Mask
Save
D-Link DSR-Series User Manual
IP Aliasing
Select either WAN1 or WAN2.
Enter an alias IP address for the WAN interface you selected.
Enter a subnet mask for the WAN interface you selected.
Click to save and activate your settings.
Description
53