Connect To The Internet; Dynamic Ip (Dhcp) - D-Link DSR-150 User Manual

Section 5 - Connect to the Internet
This router has two WAN ports that can be used to establish a connection to the internet. It is assumed that you
have arranged for internet service with your Internet Service Provider (ISP). Please contact your ISP or network
administrator for the configuration information that will be required to setup the router.
Path: Network > Internet > WAN1 Settings
Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider.
Field
Enable VLAN Tag
VLAN ID
Host Name
DNS Server Source
Primary DNS Server
Secondary DNS Server If you selected "Use These DNS Servers", enter the secondary DNS server IP address.
MAC Address Source
MAC Address
MTU Size
Custom MTU
Port Speed
Save
D-Link DSR-Series User Manual

Connect to the Internet

Dynamic IP (DHCP)

Toggle to On/Off the VLAN on WAN1.
This numeric value associated with the VLAN is used to identify traffic that is allowed into the WAN1
network. When the trunk mode is enabled, traffic which are vlan tagged with this ID is allowed into the
WAN1 network.
Enter a host name if required by your ISP.
Select either Get Dynamically from ISP or Use These DNS Servers to manually enter DNS servers
If you selected "Use These DNS Servers", enter the primary DNS server IP address.
Select Use Default MAC to use the MAC address from the WAN1 port to associate with your modem/ISP,
Clone your PC's MAC to use the MAC address of the computer you are currently using to associate with
your modem/ISP, or Use this MAC to manually enter a MAC address.
If you selected Use this MAC, enter the MAC address you want to associate with your ISP.
Select to use the default MTU value (1500) or select Custom to enter your own value.
Enter a MTU value to optimize performance with your ISP.
Select a value from the drop-down menu. The default value is Auto-Sense.
Click Save to save and activate your settings.
Description
32