Bridge Traffic Selectors - D-Link DSR-150 User Manual

Section 5 - Connect to the Internet
Path: Network > Internet > Traffic Management > Bridge Traffic Selectors
Note: Bridge Traffic Selectors is available only in DSR Octeon models.
This page shows a list of static routes configured on the router. Once a bridge bandwidth profile is created, it
can then be associated with a traffic flow from the LANPort-1 to DMZ. Bridge traffic selectors are elements like IP
addresses or services that require their outbound traffic to be regulated.
To create a Bridge Traffic Selectors:
1. Click Network > Internet > Traffic Management > Bridge Traffic Selectors.
2. The Bridge Traffic Selectors List displays the following fields:
Field
Service
Traffic Selector Match
Type
Bridge Bandwidth
Profile
4. To add a new entry to the list, click Add New Bridge Traffic Selector. This opens the Bridge Traffic
Selector Configuration page.
D-Link DSR-Series User Manual

Bridge Traffic Selectors

It indicates the service associated with this bridge traffic selector.
It displays the type of bridge traffic selector selected.
It displays the name of the bridge bandwidth profile associated with the Traffic Selector.
Description
64