Ipv6 Address Pools - D-Link DSR-150 User Manual

Section 5 - Connect to the Internet
Path: Network > IPv6 > IPv6 LAN Settings > IPv6 Address Pools
This feature allows you to define the IPv6 delegation prefix for a range of IP addresses to be served by the
router's DHCPv6 server. Using a delegation prefix you can automate the process of informing other networking
equipment on the LAN of DHCP information specific for the assigned prefix.
To add, edit, or delete a IPv6 address pool entry:
1. Click Network > IPv6 > IPv6 LAN Settings > IPv6 Address Pools tab.
2. Right-click a current entry and select Edit or Delete. To add a new entry, click Add New Address Pool.
3. Complete the fields in the table below and click Save.
Field
Start IPv6 Address
End IPv6 Address
Prefix Length
VLAN Interface
Save
D-Link DSR-Series User Manual

IPv6 Address Pools

Enter the starting IPv6 LAN address.
Enter the ending IPv6 LAN address.
Enter the prefix length.
Select the interface (LAN, VLAN) for this IPv6 pool.
Click Save at the bottom to save and activate your settings.
Description
88