Captive Portal - D-Link DSR-150 User Manual

Section 4 - LAN Configuration
Note: The DSR-150/150N/250/250N routers do not have support for the Captive Portal feature. Captive Portal is
available for LAN users only and not for DMZ hosts.
Captive Portals can be enabled on a per-VLAN basis. Hosts of a particular VLAN can be directed to authenticate
via the Captive Portal, which may be a customized portal with unique instructions and branding as compared to
another VLAN. The most critical aspect of this configuration page is choosing the authentication server. All users
(VLAN hosts) that want to gain internet access via the selected Captive Portal will be authenticated through the
selected server.
To enable Captive Portal to a specific VLAN:
1. Click Network > LAN > VLAN Settings.
2. Click Add New VLAN at the bottom or right-click an existing VLAN and select Edit.
3. Toggle Captive Portal to ON.
4. Select Captive Portal Type as either Internal CP Web or DUA External CP Web.
5. If DUA External CP Web is selected as the Captive Portal Type, you will be redirected to the DUA External
Captive Portal web pages. If Internal CP Web is selected, you will be redirected to the device Internal
Captive Portal pages.
6. Next to Authentication Server, select an authentication server from the drop-down menu. This field is
available only when Internal CP Web is selected as the Captive Portal Type.
7. Next to Login Profile Name, select a profile from the drop-down or click Create a Profile to create a new
one.
8. Select either HTTP or HTTPS for the redirect type.
9. If you would like communication between VLANs, toggle Activate InterVLAN Routing to ON.
10. Click Enable Redirect button to enable URL redirection to the Original URL or to the configured URL.
11. Click Original URL to enable URL redirection to Original URL entered by the user. Enter the URL to be
redirected after successful captive portal authentication.
12. Make any other changes/selections and click Save.
D-Link DSR-Series User Manual

Captive Portal

29