Step 3: Setup Internet Connection - D-Link DSL-2790U User Manual

Section 3 - Getting Started
This step of the wizard allows you to configure your Internet connection type.
If you have an DSL connection, select DSL. If you have a cable or NBN Fiber
connection and are connecting via the WAN port, select ETH WAN.
If you selected DSL, choose your Country and Internet Service Provider (ISP)
from the drop down menu. The necessary settings will automatically populate.
If you cannot find your country or ISP, select Others. You will need to enter
the data provided by your ISP manually. Select the Internet Protocol used by
your ISP: Dynamic IP, Static IP, PPPoE, PPPoA, or Bridged. Also select the
Connection Type, and input the VPI and VCI settings.
If you selected ETH WAN, select and configure the Internet Protocol used by
your ISP: Dynamic IP, Static IP, PPPoE, or Bridged.
If you selected Dynamic IP or Bridged, click Next to continue.
D-Link DSL-2790U Wireless N300 ADSL2+ Modem Router User Manual

Step 3: Setup Internet Connection

18