Manual Internet Connection Setup - D-Link DWR-112 Technical Support Setup Procedure

Step 7: Under the MANUAL INTERNET CONNECTION OPTION section, click on the button,

Manual Internet Connection Setup.

Step 8: Under the INTERNET CONNECTION TYPE section, On the drop down menu for My
Internet Connection is, select on Dynamic IP (DHCP). Put a check mark on Enable WAN
Failover.
Step 9: Under the 3G INTERNET CONNECTION section, configure the following;
1. Uncheck on Auto Config
2. Country: Select your current location
3. ISP: Select who provides your Internet connection
4. Dial Number: Enter the Dial Number provided by your Internet Service Provider (ISP)
5. APN: Enter the APN provided by your Internet Service Provider (ISP)
6. Authentication Protocol: Select the on the drop down menu the required authentication
7. Click on the Apply button for the settings to take effect
FAQ : How to Configure Dynamic Connection WAN Fail Over to 3G on DWR-112
-10-