Section 9 - Maintenance
Path: Maintenance > Administration > Date and Time
You can configure your time zone, whether or not to adjust for Daylight Savings Time, and with which Network
Time Protocol (NTP) server to synchronize the date and time. You can choose to set Date and Time manually,
which will store the information on the router's real time clock (RTC). If the router has access to the internet, the
most accurate mechanism to set the router time is to enable NTP server communication.
1. Click Maintenance > Administration > Date and Time.
2. Complete the fields from the table below and click Save.
Field
Current Device Time
Time Zone
Daylight Saving
NTP Servers
NTP Server Type
Primary NTP Server
Secondary NTP Server
Time to re-synchronize
Save
D-Link DSR-Series User Manual
Date and Time
Displays the current date and time on the router.
Select your time zone from the drop-down menu.
Toggle to ON to enable daylight saving time.
Toggle to ON to use NTP servers on the Internet.
Select either Default or Custom to enter specific NTP Server addresses.
If you selected Custom, enter the primary NTP server address.
If you selected Custom, enter the secondary NTP server address.
Enter the time in minutes for the router to re-synch with the NTP server(s).
Click to save and activate your settings.
Description
209