Ipv6 Lan Settings; Dhcpv6 Server - D-Link DSR-150 User Manual

Section 5 - Connect to the Internet
Path: Network > IPv6 > IPv6 LAN Settings
In IPv6 mode, the LAN DHCP server is disabled by default (similar to IPv4 mode). The DHCPv6 server will serve
IPv6 addresses from configured address pools with the IPv6 Prefix Length assigned to the LAN.
The default IPv6 LAN address for the router is fec0::1. You can change this 128-bit IPv6 address based on your
network requirements. The other field that defines the LAN settings for the router is the prefix length. The IPv6
network (subnet) is identified by the initial bits of the address called the prefix. By default this is 64 bits long. All
hosts in the network have common initial bits for their IPv6 address; the number of common initial bits in the
network's addresses is set by the prefix length field.
To configure IPv6 LAN settings on the router:
1. Click Network > IPv6 > IPv6 LAN Settings.
2. Complete the fields in the table on the next page and click Save.
D-Link DSR-Series User Manual

IPv6 LAN Settings

DHCPv6 Server

86