Pptp - D-Link DSR-150 User Manual

Section 5 - Connect to the Internet
Path: Network > Internet > WAN1 Settings
Select PPTP (Username/Password) to enter the PPTP Internet settings supplied by your Internet Service
Provider.
Field
Address Mode
Server Address
User Name
Password
MPPE Encryption
Split Tunnel
Reconnect Mode
IP Address
IP Subnet Mask
IP Gateway
Static DNS IP
DNS Server Source
Primary DNS Server
Secondary DNS Server
MAC Address Source
MAC Address
MTU Size
Custom MTU
Port Speed
Save
D-Link DSR-Series User Manual
Select Dynamic IP or Static IP (IP settings supplied by your ISP).
Enter your PPTP server address.
Enter your PPTP user name.
Enter your PPTP password.
Toggle to ON.
Toggle to ON to use split tunneling. This will allow you to connect to a VPN and Internet using the same physical
connection.
Some ISPs may require you to pay for usage time. Select On Demand if this is the case. This will have the router
connect to the Internet only when you initiate an Internet connection. Select Always On to have the router stay
connected to the Internet.
If you selected Static IP, enter the IP address supplied by your ISP.
If you selected Static IP, enter the subnet mask supplied by your ISP.
If you selected Static IP, enter the gateway IP address supplied by your ISP.
Enter the static DNS IP address.
Select either Get Dynamically from ISP or Use These DNS Servers to manually enter DNS servers.
If you selected "Use These DNS Servers", enter the primary DNS server IP address.
If you selected "Use These DNS Servers", enter the secondary DNS server IP address.
Select Use Default MAC to use the MAC address from the WAN1 port to associate with your modem/ISP, Clone your
PC's MAC to use the MAC address of the computer you are currently using to associate with your modem/ISP, or Use
this MAC to manually enter a MAC address.
If you selected Use this MAC, enter the MAC address you want to associate with your ISP.
Select to use the default MTU value (1500) or select Custom to enter your own value.
Enter a MTU value to optimize performance with your ISP.
Select a value from the drop-down menu. The default value is Auto-Sense.
Click Save to save and activate your settings.

PPTP

Description
35