Client - D-Link DSR-150 User Manual

Section 7 - VPN
To configure the router as an OpenVPN client:
1. Click VPN > OpenVPN > OpenVPN Settings.
2. Toggle OpenVPN to ON and complete the fields in the table below.
Field
Mode
Server IP
Failover Server IP
Port
Tunnel Protocol
Encryption Algorithm Select the encryption algorithm from the drop-down menu.
Hash Algorithm
D-Link DSR-Series User Manual
Select Client.
Enter the IP address of the OpenVPN server.
Select the type of identifier that you want to provide for Failover mechanism at the Failover Server IP: IP
Address or FQDN (Fully Qualified Domain Name). This feature allows to configure an additional OmniSSL
server for client, which will be used when primary server is down. This is optional and applicable only in
client mode.
Enter the port number on which openvpn server (or Access Server) runs.
Select either TCP or UDP.
Select the hash algorithm from the drop-down menu.

Client

Description
138