Protocol Binding - D-Link DSR-150 User Manual

Section 5 - Connect to the Internet
Path: Network > Routing > Protocol Binding
Protocol bindings are useful when the Load Balancing feature is in use. Selecting from a list of configured services
or any of the user-defined services, the type of traffic can be assigned to go over only one of the available WAN
ports. For increased flexibility the source network or machines can be specified as well as the destination network
or machines. For example, the VOIP traffic for a set of LAN IP addresses can be assigned to one WAN and any
VOIP traffic from the remaining IP addresses can be assigned to the other WAN link. Protocol bindings are only
applicable when load balancing mode is enabled and more than one WAN is configured.
To add, edit, or delete a protocol binding entry:
1. Click Network > Routing > Protocol Binding.
2. Right-click a current entry and select Edit or Delete. To add a new entry, click Add New Protocol Binding.
3. Complete the fields in the table below and click Save.
Field
Service
Local Gateway
Source Network
Destination Network
Save
D-Link DSR-Series User Manual

Protocol Binding

Select a service from the drop-down menu.
Select a WAN interface.
Select the source network: Any, Single Address, or Address Range. If Single Address or Address
Range is selected, enter the IP address or IP range.
Select the destination network: Any, Single Address, or Address Range. If Single Address or
Address Range is selected, enter the IP address or IP range.
Click Save to save your settings.
Description
74