Dynamic Filtering - D-Link DSR-150 User Manual

Section 8 - Security
Path: Security > Web Content Filter > Dynamic Filtering
Dynamic Filtering will allow you to filter content from a list of categories. The router must be upgraded with the
WCF license and then the Content Filtering option, which allows the user to filter out internet sites, needs to be
enabled. When enabled, access to a website belonging to one of these configured categories will be blocked
with an error page.
Note: Dynamic WCF license is not available in some regions, please contact D-Link worldwide office for product
information.
To add/import/export URLs to the approved list:
1. Click Security > Web Content Filter > Dynamic Filtering.
2. Toggle Global Filtering to ON to enable dynamic filtering.
3. Toggle any of the listed categories to ON to block. Toggle to OFF to allow.
4. All the fields present on this page are given in the table below.
4. Click Save.
Field
Non-Managed Action
Allow Override
Override Timeout
Update on Access
Adult
D-Link DSR-Series User Manual

Dynamic Filtering

This is an action to be taken for the Non Managed Site. You may Allow or Block. By default, it
is Allow.
It allows the sites categorized under Blocked categories.
Enter the time (in seconds) for which all the disallowed categories will be allowed.
Enable the button to restart the override timer on each new access to disallowed categories.
Sites that host explicit sex content, nudity and sites that use profanity
Description
178