Dhcp Server - D-Link DSR-150 User Manual

Section 4 - LAN Configuration
1. Select DHCP Server from the drop-down menu.
2. Complete the fields in the table below and click Save.
Field
DHCP Mode
Starting IP Address
Ending IP Address
Default Gateway
Domain Name
Lease Time
Configure DNS/WINS
Primary DNS Server
Secondary DNS Server Enter the secondary DNS Server IP address.
WINS Server
Save
D-Link DSR-Series User Manual

DHCP Server

Select DHCP Server from the drop-down menu.
Enter the starting IP address in the DHCP address pool. Any new DHCP client joining the LAN is assigned
an IP address within the starting and ending IP address range. Starting and ending IP addresses must
be in the same IP address subnet as the router's LAN IP address.
Enter the ending IP address in the DHCP address pool.
Enter the default gateway IP address you want to assign to your DHCP clients. This IP is usually the
router's LAN IP address (default is 192.168.10.1).
Enter a domain name.
Enter the time, in hours, for which IP addresses are leased to clients.
Toggle to On to manually enter DNS and/or WINS server IP address(es). If set to Off, your router's LAN
IP address will be assigned the DNS server to your clients and the router will get the DNS information
from your ISP.
Enter the primary DNS Server IP address.
Enter the IP address of a WINS server (Optional).
Click Save at the bottom to save and activate your settings.
Description
19