Section 5 - Connect to the Internet
1. Click Network > Internet > WAN Mode.
2. Complete the fields from the table below and click Save.
Field
WAN Mode
Load Balance
WAN Health Check
Retry Interval is
Failover After
Save
D-Link DSR-Series User Manual
Select Load Balancing from the drop-down menu.
Select Round Robin.
• DNS lookup using WAN DNS Servers: DNS Lookup of the DNS Servers of the primary link is used to
detect primary WAN connectivity.
• DNS lookup using DNS Servers: DNS Lookup of the custom DNS Servers can be specified to check the
connectivity of the primary link.
• Ping these IP addresses: These IP's will be pinged at regular intervals to check the connectivity of the
primary link.
The number tells the router how often it should run the above configured failure detection method.
This sets the number of retries after which failover is initiated.
Click to save and activate your settings.
Round Robin
Description
47