Snmp Trap List - D-Link DSR-150 User Manual

Section 9 - Maintenance
Path: Maintenance > Management > SNMP > SNMP Trap List
To create a new SNMP trap:
1. Click Maintenance > Management > SNMP > SNMP Trap List tab.
2. Right-click an entry and select either Edit or Delete. To add a new trap, click Add SNMP Trap.
3. Complete the fields from the table below and click Save.
Field
IP Address
Port
Community
Authentication Type
Save
D-Link DSR-Series User Manual

SNMP Trap List

Enter the IP Address of the SNMP trap agent.
Enter the SNMP trap port to which the trap messages will be sent.
Enter the community string to which the agent belongs. Most agents are configured to listen for
traps in the Public community.
Select the SNMP version used by the trap agent. The choices are v1, v2c, or v3.
Click save to activate your settings.
Description
221