External Authentication Servers; Radius Server - D-Link DSR-150 User Manual

Section 8 - Security

External Authentication Servers

Path: Security > Authentication > External Auth Server > RADIUS Server
A RADIUS server can be configured and accessible by the router to authenticate client connections.
To configure the router to connect to your RADIUS server:
1. Click Security > Authentication > External Auth Server > RADIUS Server tab.
2. Complete the RADIUS server information from the table below and click Save. You can configure up to
three servers.
Field
Server Checking
Authentication Server
Authentication Port
Secret
Timeout
Retries
Save
D-Link DSR-Series User Manual

RADIUS Server

Click it to test the connection(s) to your RADIUS Server(s).
Enter the IP address of your RADIUS server.
Enter the RADIUS authentication server port.
Enter the secret key that allows the device to log into the configured RADIUS server. It must match
the secret on RADIUS server.
Set the amount of time in seconds that the router should wait for a response from the RADIUS
server.
This determines the number of tries the controller will make to the RADIUS server before giving
up.
Click Save at the bottom to save and activate your settings.
Description
161