Traffic Shaping - D-Link DSR-150 User Manual

Section 5 - Connect to the Internet
Path: Network > Internet > Traffic Management > Traffic Shaping
Once a profile has been created it can then be associated with a traffic flow from the LAN to WAN. Traffic selector
configuration binds a bandwidth profile to a type or source of LAN traffic with the following settings.
To create a traffic selector:
1. Click Network > Internet > Traffic Management > Traffic Shaping.
2. Click Add New Traffic Selector.
3. Complete the fields from the table below and click Save.
Field
Available Profiles
Service
Traffic Selector Match
Type
IP Address
D-Link DSR-Series User Manual

Traffic Shaping

Select a bandwidth profile from the drop-down menu.
Select a service from the drop-down menu.
Select any one of the following match types:
• IP: Select this option to associate this traffic selector to an IP Address of a LAN device. Once selected,
enter the IP address of the LAN device.
• MAC Address: Select this option to associate this traffic selector a specific MAC address on the
LAN. Once selected, enter a valid MAC Address.
• Port Name: If this option is selected, enter the LAN port number (1 through 4).
• VLAN: Select this option to associate this traffic selector a specific VLAN. If this option is selected,
select one of the configured Port Name identifiers.
If you select IP, enter the IP address of the source associated with this profile.
Description
60