802.11Ac Configuration - D-Link DSR-150 User Manual

Section 6 - Wireless Settings
Path: Wireless > General > Radio Settings > 5 GHz
This section provides configuration options to use the DSR-500AC or DSR-1000AC advanced wireless capabilities
in the 5 GHz band.
With 802.11AC, data throughput can be significantly increased as compared to 802.11n rates as the channel
bandwidth can be as high as 80 MHz. The available channels and spacing bandwidth are regulated by the
regulatory setting of the specific country the DSR-500AC or DSR-1000AC is deployed in. By selecting 802.11AC
rates, the 5 GHz radio will use the enhance capability of the new design and will send more data in a single
packet (via wireless frame aggregation).
Field
Mode
Channel Spacing
Control Side Band
Current Channel
Channel
Default Transmit Power Enter a value in % as the default transmitted power level for all APs that use this radio.
Transmit Power
Transmission Rate
Save
D-Link DSR-Series User Manual

802.11AC Configuration

It shows the 802.11 modulation techniques being used.
Distance in MHz between the successive channels
Control Sideband defines the sideband which is used for secondary or extension channel when AP
is operating in 40 MHz channel width. This setting is only applicable to 802.11n traffic and used in
conjunction with the 40 MHz channel spacing. Select the control sideband from the drop-down menu.
Channel being used in the available spectrum.
Channel number selected by user, this is defined by the country code for the device.
Transmit power currently in use by the radio. Transmit power level is pre-configured such that the
transmit power output will range between 10-14 dBm.
Select a transmission rate from the drop-down menu. This will lock the transmission rate of your wireless
connection. It is strongly recommended to use Best (Automatic).
Rates used by device to download the data to client.
Description
100