Section 7 - VPN
Path: VPN > IPSec VPN > One To One Mapping
This page shows a list of configured IPsec One To One Mapping. A user can add, edit, and delete IPsec One To One
Mapping on this page. To upload an exported IPSec VPN policy, follow the steps given below:
1. Click VPN > IPSec VPN > One To One Mapping.
2. IPsec One to One Mapping list is displayed. The table lists the available One to One Mapping rules that
have been configured.
3. The fields present on this page are given in the table below.
Field
Source IP Range Start
Mapped IP Range Start It displays Mapped IP address through which traffic should be forwarded/received from/to the LAN host
Range Length
IPSec Policy Name
4. To add a new entry into the table, click Add New One to One Mapping to open the One to One
Mapping Configuration page.
D-Link DSR-Series User Manual
One To One Mapping
It displays the starting IP address in the private (LAN) IP subnet.
IP or range of IP addresses.
It displays Range value between 1 to 254, which maps One To One private address to public address up
to given range.
It displays the name of the IPSec policy associated with the configured One To One mapping rule.
Description
119