Table of Contents
Advertisement
o
|
3
@ Power ON
@ Push [PWR] in to turn power ON.
All display indications
appear briefly'.
BASIC OPERATION
*SCRM appears only when an optional
UT-08 is installed,
® Operate the transceiver as indicated in the following sec-
tions.
© Low voltage indicator
When "BATT" appears and flashes
as shown at right, the vessel's bat-
tery voltage has dropped
below
11V,
indicating there is a DC
power source problem, In this case, check your vessel's bat-
tery and DC power cable.
@ Channel selection
© Channel 16
Channel 16 is the distress channel. It is used for establishing
initial contact with another station and for emergency com-
munications. Channel 16 is monitored during dualwatch/tri-
watch. While standing by you are required to monitor channel
16.
-
6
|
© Call channel
The call channel is used to store your most often-used chan-
nel for quick recall. In addition, the call channel is monitored
during tri-watch, The default setting for the call channel is
channel 9, which is for pleasure boat use.
Push CG)
rt
ves Lf
"CALL" indicates that the
call channel is selected.
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-M127 and is the answer not in the manual?