4.3.2 Setting Individual Capturing Condition by Type
Follow the procedure described below to set an Individual capturing condition for the type which is currently
being set.
1.
Select "TYPE" > "Type Setting" from the menu bar.
2.
Select "Camera".
3.
Select "No (Individual)" for "Common Setting".
Now, the setting you are going to set applies only to the currently setting type.
To return to Common Setting
1.
Select "Type Setting" > "Camera".
2.
Select "Yes (Common)" for "Common Setting".
If the type set to use common setting already exists, the setting condition of the type will be copied to or
overwritten the current type.
60