4.7.15 Smart Edge (Line)
(Available from Ver.2.0)
What is Smart Edge (Line)?
Smart Edge (Line) is a function to calculate an approximate line using the coordinate values detected with a
number of cells.
Detecting the line of the edge face enables the detection of the angle of the object even if the object has a
rough face.
The mode for measuring the width of the object is also available.
Inspection example
Detect Mode: Measure Deviation, Measure Distance
•
Detection of the
position of a
projection
•
Angle of an object
Output Data
Approximate Line
Measurement
(Deviation,
Distance, Width)
Each cell
Judgement
Used Edge Count
Unused Edge
Count
Detection of a corner
(Combination of Smart
Edge (Line) and
Geometry Calculation)
•
Coordinates (Start point, End point)
•
Angle
•
Line element (a, b, c)
•
Linearity
•
Max. measurement, Position of max.
measurement
•
Min. measurement, Position of min.
measurement
•
Average Measurement
•
Standard Deviation
•
Coordinate of edge, Differential, Measurement
•
(Total) Judgement Result, Measurement
Judgement, Standard Deviation Judgement,
Linearity Judgement, Unused Edge Count
Judgement
Distance difference from
Base Position
(Measure Distance)
Detect Mode:
Measure Width
•
Width measurement
•
Detection of the max.
and min. values, and
output of the position
183