Panasonic PV500 User Manual page 124

Selecting a Camera
Select a camera image to set "Smart Matching" checker.
1.
Select "Area Setting" in "Smart Matching" setting window.
2.
Select a camera No. in "Camera".
The selected camera image is displayed.
Select a displayed image type (Live/Memory and Gray/Binary) or magnification in "Image Menu" opened
by pressing the F1 key.
Selecting Preprocess / Position Adjustment
Position Adjustment function is helpful when position or angle of an inspection object can be detected in
advance. In this case, the search area for Smart matching or the range of detect angle can be smaller, so that
the processing speed can be faster.
page 95
Setting a Template
Register an image pattern to detect.
Up to 64 templates can be registered per Smart Matching. When registering multiple templates, the checker
inspects based on all the templates and outputs the area with the largest correlation value and the number of
the template used to detect the area.
1.
Select "Area Setting" in "Smart
Matching" setting window.
2.
Select "Set" for "Template".
Template setting window is displayed.
3.
Tilt the ENTER key up/down/left/right to
select a template No. Select a template
No.0 when registering a template for
the first time.
4.
Select "Register".
The screen to draw a template area is
displayed.
When opening this screen after the
execution of an inspection, the image to be
displayed may be the one which the
current memory image has been moved
and rotated. Refer to "Image to be
displayed when reregistering a template"
(page 121) for details.
122