6.5 Initializing Environment Settings
This function initializes the Environment data and restores it to the default settings.
1.
Select "ENVIRONMENT" > "Initialize" from the menu bar.
The confirmation message appears.
2
. Select "Yes".
Environment data are initialized.
If you select "No", initializing is canceled.
Initializing Environment might shows the message below when "Common" is selected for "Template
Registration" in "System Settings" > "Operation".
Free space for template areas is used up. You cannot change the setting of "Template Registration" to "Per
Checker".
In the case, the settings are initialized except "Template Registration" setting which holds "Common". Refer
to page 125 about the reason why you cannot change to "Per Checker".
342