Panasonic PV500 User Manual page 414

Details of Read out/write Command Parameter
When writing maximum and minimum values in sets using %PWP command, specify maximum values in
Data 1 and minimum values in Data 2. When reading two data in sets using %PRP command, the data is
output in the same order.
System values
Parameter
Inspection time SYS_TIME1
Inspection Cycle SYS_TIME2
Total Judgement SYS_RESULT
Scan Count SYS_COUNT
Window Status SYS_EDIT
Operation Status SYS_RUN
Current Type No. SYS_TYPE
Date SYS_DATE
Time SYS_TIME
System Register 0 SYS:REG0
to System Register
7
Slice Level
The symbol of "?" shown in parameters is a slice level group (A - Z)
Parameter
Maximum value BLV:H?
Minimum value BLV:L?
Maximum and BLV:PAIR?
Minimum values
Checker
The symbol of "nnn" shown in parameters is a checker number (000 - 999).
Line Parameter
Max. No. of Pixels. LICnnn:DMAX
Min. No. of Pixels. LICnnn:DMIN
Max. and Min. No. of LICnnn:DPAIR
Pixels.
Max. No. of Objects LICnnn:LMAX
Min. No. of Objects LICnnn:LMIN
Max. and Min. No. of LICnnn:LPAIR
Objects
Binary Window Parameter
OK Judge. Max. BWCnnn:MAX
OK Judge. Min. BWCnnn:MIN
OK Judge. Max. and BWCnnn:LPAIR
Min.
412
Read Write Minimum
value
Yes 0.00
Yes 0.00
Yes 0
Yes 0
Yes 0
Yes 0
Yes 0
Yes Yes
Yes Yes
Yes Yes -9999999.999
Read Write Minimum
value
Yes Yes 0
Yes Yes 0
Yes Yes 0
Read Write Minimum
value
Yes Yes 0
Yes Yes
0
Yes Yes 0
Yes Yes 0
Yes Yes 0
Yes Yes 0
Read Write Minimum
value
Yes Yes 0
Yes Yes 0
Yes Yes 0
Maximum Details
value
9999.00 When exceeding the
upper limit, 10000.00 is
9999.00
output.
1 0:NG 1: OK
2147483647
1 0: RUN menu,
1: SETUP menu
1 0: RUN, 1: STOP
255
YYYY/MM/DD
(4-digit of year/ 2-digit
of Month/ 2-digit of
Day)
HH:MM:SS
(2-digit of Hour:
2-dgit of Minute:
2-digit of Second)
9999999.999 Up to 3-digit is
available after decimal
point.
Maximum Details
value
255
255
255 Data 1 = Min.
Data 2 = Max.
Maximum Details
value
125938
125938
125938 Data 1 = Min.
Data 2 = Max.
41979
41979
41979 Data 1 = Min.
Data 2 = Max.
Maximum Details
value
1920000
1920000
1920000 Data 1 = Min.
Data 2 = Max.