Input/Output - Panasonic PV500 User Manual

6.3 Input/output

This function assigns functions of signals input from the external device to PV500, and makes settings on
outputting result data and images.
Parallel I/O:
Parallel I/O Output:
Serial:
General output:
Image output:
Save Image Memory:
Print Screen:
Displaying Input/Output Window
1
. Select "ENVIRONMENT" from the menu
bar.
2
. Select "Input/Output".
The screen of communication setting is
displayed.
338
Setting of the minimum OFF time of READ END signal and
ACCEPT signal, and assignment of ASSIGN0-5 signals.
Setting of outputting inspection results through I/O interface
(Selecting the destination and output data, setting output
method)
Setting of communication condition of COM.0 port (transmission
format)
Setting of outputting inspection results through RS-232C
interface and Ethernet interface
Setting of outputting inspection images to the external device
(Selecting the destination and output camera image, setting
output method)
Setting to save inspection images in the image memory of PV
Selecting a saving place of screen capture
Page 339
Page 270
Page 339
Page 276
Page 280
Page 286
Page 52