Creating A Checker - Panasonic PV500 User Manual

4.7.2 Creating a Checker

Creating a New Checker
1.
Select "INSPECTION" > "Checker".
2.
Select a checker type to create in "Checker Type".
3.
Select the checker No. list and specify a checker number
to create.
A new checker of the specified type is created and setting
window is displayed.
As the default setting, the number of available checkers is
100 (0-99) for each checker. Increasing the number of blocks
enables to create checkers after No.101. To set the number
of blocks, select "TYPE" > "Execution Condition" > "Number
of Blocks".
Copying Checker
1.
Move the cursor onto the checker number you want to copy and press the FUNC key.
The Pop-up menu appears.
2.
Select "Copy".
3.
Move the cursor onto the checker number you want to paste
and press the FUNC key.
4.
Select "Paste".
The checker is copied.
If a checker already exists in the destination, the message of
overwrite confirmation appears. Selecting "Yes" executes copying
the checker.
5.
Press the ENTER key to select the pasted checker.
The setting window of the pasted checker is displayed.
Deleting a Checker
1.
Move the cursor onto the checker number you want to delete and press the FUNC key.
The pop-up menu appears.
2.
Select "Delete".
The confirmation screen is displayed.
3.
Select "Yes".
The checker is deleted. Select "No" to cancel.
92