Panasonic PV500 User Manual page 100

Selecting Preprocess / Slice Level / Position
Adjustment
page 95
Setting an Inspection Area
Set a line which is the inspection span.
You cannot set a Mask Area in Line checker.
1.
Select "Area Setting" in "Line" setting window.
2.
Select "Area Setting".
Area setting window is displayed.
3.
Select a shape of inspection area from
"Change Shape".
Line, Broken line, and Ellipse are available.
4.
Select "Change" and draw an area.
Refer to the section of Drawing an
Inspection Area, page 47.
5.
After drawing is completed, press the
CANCEL key.
Using Area Size Adjustment
Area Size Adjustment is a function for inspecting variable-sized objects. The function adjusts an inspection
area according to the size of the object detected with Area Size Adjustment checker.
Refer to Chapter 4.9, page 208 about Area Size Adjustment and the setting procedure.
Selecting a Target Color
Set to count pixels of either white or black on a binary image. Target color can be selected for each of pixel
counting and object counting.
1.
Select "Inspection Condition" > "Count
Pixel Color".
2.
Select "White" or "Black" to detect.
White (default):
Counts the number of white pixels within the
area.
Black:
Counts the number of black pixels within the
area.
3.
Select "Count Object Color".
4.
Select "White" or "Black" to detect.
White (default): Counts the number of white objects within the area.
Black: Counts the number of black objects within the area.
98