Panasonic PV500 User Manual page 102

Setting Judgement Limits
Set tolerance (Maximum and Minimum values) of the counted pixels and objects. If the counted pixels and
objects are within the tolerance, the object will be judged as "OK", if it is out of it, the object is judged as "NG".
1.
Select "Judgement Limits".
2.
Enter "Max. No. of Pixels." and "Min.
No. of Pixels".
Enter the values in pixels.
3.
Enter "Max. No. of Objects." and "Min.
No. of Objects."
4.
After inputting is completed, press the
CANCEL key.
Running a Test
Confirm if the current settings perform an inspection properly.
1.
Press the TRIG key.
When a live image is displayed on the screen, PV captures a new image first and runs a test. When a
memory image is displayed, it runs a test using the current memory image without capturing any images.
Position adjustment and area size adjustment are also executed at the same time if they are used.
2.
Confirm the inspection result.
100