Selecting An Image Output Condition - Panasonic PVWIN-T30 Instruction Manual

Selecting Total Judgement Expression
1.
Select "Condition" in judgement output
setting window.
"Condition" setting window is displayed.
2.
Select "Condition" column of Total
Judge.
Select a judgement type to register as a Total
Judgement.
[NO]: No Total Judgement
[JRC]: Use a JRC(Internal) as a Total Judgement
[JDC]: Use a JDC(External) as a Total Judgement
3.
Select "Checker No." column and set a judgement number.
The result of the Total Judgement is displayed in the "Result" column.
4.
After setting is completed, press the CANCEL key.
Now you completed registering.

Selecting an Image Output Condition

Inspected images can be saved in the image memory of PV-T30 and output to the external devices when the judgement of
the judging checker is "NG" during an inspection. Select a judging checker to be a condition to output images.
This setting is available only when the condition of "Image Output" (or "Save Image Memory") is set to "NG
judgement".
（「NG Judgment」･･･To specify a condition expression to output images. This condition expression is common
to all cameras. When judgement is NG, all images of the cameras which is set to "Output" will be output.）
Selecting a Condition Expression of Inspection
Image Output
1.
Select "Condition" in judgement output setting window.
"Condition" setting window is displayed.
2.
Select "Condition" column of Image Output.
Select a judgement type to register.
[No]: Images are not output.
[No Condition]:
Always output images regardless of inspection results.
[JRC]:
Use a JRC(Internal) as a condition to image output.
[JDC]:
Use a JDC(External) as a condition to image output.
*Select "No Condition" to temporarily output images regardless of a judgement condition when the image
output condition is set to "NG Judgement" or "Judge. Per Cam." which is on the window of "Input/Output" of
"ENVIRONMENT".
When the other conditions are selected than "NG Judgement" and "Judge. Per Cam.", the setting of Judgment
window is invalid.
3.
Select "Checker No." column and enter a judgement number.
The status of Image Output is displayed in the "Result" column.
"No" indicates that image output is not executed because the condition is not fulfilled.
4.
After setting is completed, press the CANCEL key.
Now you completed registering.